|
042 |
Gray Backpack Carrying Case |
|
044 |
Yellow Backpack Carrying Case |
|
060 |
Low emissions shielding |
|
0B0 |
Delete manual set |
|
0B1 |
Add extra manual set |
|
0BV |
Service documentation, component level (CLIP) |
|
0BW |
Service documentation, assembly level |
|
106 |
FSK Demodulator, available only with option 304 |
|
120 |
Wide offset phase noise improvement and ACPR range extension |
|
1AX |
Replaces GPIB port with serial port, not compatible with option A4H |
|
1CP |
Rackmount Kit with Handles |
|
1D5 |
High Stability Time Base |
|
1D6 |
Time Gated Spectrum Analysis |
|
1D7 |
50 Ohm to 75 Ohm Minimum Loss Pad |
|
1DN |
50 ohm Tracking Generator, 9 kHz - 3 GHz |
|
1DR |
10 Hz Resolution Bandwidth, 1 Hz Resolution Bandwidth when installed with option 1D5 |
|
1DS |
Built-in preamplifier |
|
219 |
Noise Figure Measurement personality |
|
225 |
Cable Fault Location Measurement application, requires option 1D5, not compatible with option BAH |
|
226 |
Phase Noise Measurement personality, requires option 1DR for measurements less than 10 kHz |
|
227 |
Cable TV Service and Analog Broadcat personality |
|
228 |
Bluetooth Measurement personality |
|
229 |
Modulation Analysis personality, requires opts B7D, B7E, A4H, and 1D5, includes opt. 231 capability |
|
230 |
BenchLink Web Remote Control software, requires option A4H |
|
231 |
ESA to 89601A Vector Signal Analysis software link utility |
|
252 |
EDGE upgrade to GSM measurement personality, requires option BAH |
|
266 |
HP 8566/68 Programming code compatibility |
|
290 |
HP 8590-series Programming code compatibility |
|
304 |
Bluetooth Measurement Analyzer, includes opts 229, 106, B7D, B7E, 1DS, and 1D5 |
|
A4H |
Adds GPIB port |
|
A5D |
12 volt power cable |
|
AXT |
Hard Transit Case |
|
AYQ |
EMI detectors and FM demodulation, requires option 1DR |
|
AYT |
Gray Soft Carrying Case |
|
AYU |
Yellow Soft Carrying Case |
|
AYX |
Fast Time Domain Sweep; includes IF, sweep, and video output ports |
|
AYZ |
External mixing, available on E4407B only |
|
B70 |
BenchLink Spectrum Analyzer, pc Software, orderable as E4444A, requires option A4H or 1AX |
|
B72 |
Expansion Memory |
|
B75 |
Performance Option bundle, includes options 1D5, 1DR, and 1DS |
|
B7B |
TV trigger and picture on screen, requires option BAA, not compatible with option 060 |
|
B7D |
Digital demodulation hardware, requires option 1D5, must be ordered jointly with option B7E |
|
B7E |
Digital demodulation hardware, requires option 1D5, must be ordered jointly with option B7D |
|
B7K |
Cable Fault Measurement Kit requires options 1DN or STG and options 225 or BAH |
|
BAA |
FM Demodulation/Deviation, not compatible with option 304 or option 106 |
|
BAB |
APC 3.5 mm RF Input Connector, available on E4407B only |
|
BAC |
cdmaOne Measurement personality, requires options B7D, B7E, and 1D5 |
|
BAH |
GSM/GPRSS Measurement personality, requires opts B7D, B7E, 1D5, and 1D6 |
|
COM |
Communications Test Analyzer Ordering option, includes options 1D5, 1DR, 231, BAA, B7D, B7E & A4H |
|
E1779A |
Snap-on Battery Pack and Charger |
|
H26 |
Uncalibrated 26.5 GHz preamplifier available on E4407B |
|
H70 |
70 MHz IF output, recommended for use with 89611A VSA |
|
J36 |
FM Deviation personality enhancement, requires option BAA |
|
STD |
Standard Analyzer Ordering option, includes options AYX and BAA |
|
STG |
Standard Analyzer with Tracking Generator Ordering option, equivalent to STD with 1DN |
|
UE2 |
Firmware Upgrade |
|
UK6 |
Commercial calibration certificate |
|
UK9 |
Front Panel Cover |
|
UKB |
100 Hz (30 Hz usable) frequency range extension, requires option 1DR |
